Avenview WL-VGA-EXT Guide de l'utilisateur télécharger pdf (Page 12)

www.avenview.com

1.12 Network Status

You can setup various network settings in this section:

1.12.1 Auto-Configuration Network Setup

The default setting of the WL-VGA-EXT is DHCP client. When the WL-VGA-EXT is connected to a LAN that

already has a DHCP server present, the WL-VGA-EXT takes an IP address assigned to it by the server. When the

WL-VGA-EXT is connected to a LAN that does not have a DHCP server, the WL-VGA-EXT becomes the DHCP

server in the network.

IP Setup

You can select “obtain IP address automatically” or “Use the following

IP address”

IP Address: The default value is 192.168.100.10.

Subnet Mask: The default value is 255.255.255.0

Default Gateway: The default value is 192.168.100.10

DHCP Server Setup

You can select “auto(Enable/Disable DHCP Server” or “Disable”)

Start IP: The start IP address of DHCP Server.

End IP: The end IP address of DHCP Server.

Wireless Setup

Region: default value is “Worldwide”.

SSID: SSID string, max. Length is 32 bytes.

Channel: to set fixed channel or Auto. The “Auto” means after power on WL-VGA-EXTd, it will scan all

of wireless channel and select clear one channel

Gatekeeper

1 2 ... 7 8 9 10 11 12 13 14 15

Pas de commentaire

Avenview WL-VGA-EXT Guide de l'utilisateur Page 12